Designed with transparent car decoration, the i520S-G series sightseeing home lift provides passengers with a broader field of vision, present an excellent and efficient sightseeing experience. The safety system has been fully upgraded and adopts high-quality parametric design to meet the individual needs of different passengers.
The i520S-G series sightseeing home lift is committed to providing passengers with a safer and more comfortable riding experience.
When the elevator is not in maintenance mode, and did not stop on the leveling area, when meeting the safety requirements, the elevator will automatically run at slow to a leveling area, and then open the door.
When manual winding required over 400N, setup the emergency electric operation switch and operation, to replace manual winding.
Call the intercom host on the COP through the talk button. When there is no answer, the intercom host will automatically dial the 3 phone numbers (or mobile phones) set in turn until it is connected.
When the running car is not in the door area and the person is trapped due to the power failure of the building, the power failure emergency leveling device will start, driving the elevator to run to the door area at a low speed to open the door and release the person.
When the passenger is trapped in the cabin, if the elevator fault is are coverable fault and does not affect the safe operation of the elevator, the passenger can press the top and bottom buttons at the same time and hold it for more than 10 seconds. In this way, the elevator can temporarily shield the fault and run to the leveling position automatically, open the door to release people, and lock the elevator.
The HOP has the function of password setting and elevator locking to prevent children from operating the elevator and avoid the possible danger.
The control cabinet can be configured with an absolute position system, which can greatly reduce the hoist way components and optimize the hoist way space.
After setting a password for a specified floor, if you want to register for that floor, you need to enter the password before you can register successfully.
Note: When configuring the hoistway frame colors with an asterisk(*), the elevator components inside the hoistway will be sprayed with RAL9005 Titanium Black.
Front Cabin:
Champagne Gold Sheet Metal Painted
White Translucent Acrylic + Black Aluminium Alloy Frame
Three Cabins (except side middle):
Champagne Gold Aluminium
Alloy + Laminated Tempered Glass
Side Middle Cabin:
Black Titanium Mirror + Strip Lights on Both Sides
Outer Sealing Plate/Lintel:
Sheet Metal (Galvanized) Painted
Kick Plate:
Champagne Gold Aluminium Alloy
Floor:
Jazz White Marble
Front Cabin:
Black Titanium Sheet Metal Painted
White Translucent Acrylic + Black Aluminium Alloy Frame
Three Cabins (except side middle):
Titanium Black Aluminium Alloy + Laminated Tempered Glass
Side Middle Cabin:
Black Titanium Mirror + Strip Lights on both Sides
Outer Sealing Plate/Lintel:
Sheet Metal (Galvanized) Painted
Kick Plate:
Titanium Black Aluminium Alloy
Floor:
Jazz White Marble
Front Cabin:
Warm White Sheet Metal Painted
White Translucent Acrylic + Black Aluminium Alloy Frame
Three Cabins (except side middle):
Warm White Aluminium Alloy + Laminated Tempered Glass
Side Middle Cabin:
Black Titanium Mirror + Strip Lights on Both Sides
Outer Sealing Plate/Lintel:
Sheet Metal (Galvanized) Painted
Kick Plate:
Warm White Aluminium Alloy
Floor:
Jazz White Marble
Front Cabin:
Violet-blue Sheet Metal Painted
White Translucent Acrylic + Black Aluminium Alloy Frame
Three Cabins (except side middle):
Violet-blue Aluminium Alloy + Laminated Tempered Glass
Side Middle Cabin:
Black Titanium Mirror + Strip Lights on Both Sides
Outer Sealing Plate/Lintel:
Sheet Metal (Galvanized) Painted
Kick Plate:
Violet-blue Aluminium Alloy
Floor:
Jazz White Marble